Knowledgebase
Jakinid Support Website > Help Desk (Jakinid.com) > Knowledgebase

Search help:


How can I reset the IP reader device?

Solution

To reset the ACTA3er to default IP address and user data, remove power and carefully unscrew the 4 black screw on the back of the ACTA3er and keep the screws in a safe place.

Carefully separate the front and the back and be careful with the antenna wiring during the process.

Locate the jumper/selectable switch panel located above the 3 capacitors.

There will be a jumper located on the bottom set of the panel (bottom left)

 

 

Now power up the ACTA3er
Wait patiently until you heard 2 beeps. Then give it 5 seconds and unplug power.
Move the jumper back to 

 

Your ACTA3er can now be access with the IP address: 192.168.1.100 or 192.168.1.200 (Please try both IP addresses).

 
Was this article helpful? yes / no
Article details
Article ID: 41
Category: IP-Reader
Views: 1401
Rating (Votes): Article not rated yet (0)

 
« Go back

$s = 1; if (file_exists(HESK_PATH . 'hesk_license.php')) { $h = (!empty($_SERVER['HTTP_HOST'])) ? $_SERVER['HTTP_HOST'] : ((!empty($_SERVER['SERVER_NAME'])) ? $_SERVER['SERVER_NAME'] : getenv('SERVER_NAME')); $h = str_replace('www.','',strtolower($h)); include(HESK_PATH . 'hesk_license.php'); if (isset($hesk_settings['license']) && strpos($hesk_settings['license'],sha1($h.'h3&Fp2#LaA&59!w(8.Zc]*+uR512')) !== false) { $s = 0; } else { echo '

INVALID LICENSE (NOT REGISTERED FOR '.$h.')!

'; } } if ($s) { echo '

 
Powered by Help Desk Software HESK - brought to you by Help Desk Software SysAid

'; } echo '
'; include(HESK_PATH . 'footer.txt'); echo '';