How does ACTAtek4 work with QR code access?

Solution

QR code is like another type of digital password so that the customer can purchase any ACTAtek device with the built-in camera function to support it. e.g.ACTA4-1K-P-C (*PIN model with built-in camera) which means that it does not need to have Facial model or Smart Card model to make it work.

As for the generation of QR code, please either Login to ACTAtek device or AMS webpage to enter any numbers or strings of characters to generate a QR code. See the attached file as examples.

Note:For AMS or AMS SaaS, the QR code icon will not show up until a Smart Card number is entered/saved.

After that, please save the generated QR code as a JPEG file, and then send it to User's mobile phone via WhatsApp or email attachment file or print it out . See below steps as an example about how to generate a QR code ,and then access the device.

Work flow of adding QR code user from the device's webpage:

1.Login to device's [Add New User] page or [View User List] page, and then enter User's preferred QR code number e.g.20210210 or use the existing smart card no. to generate .

2.Enable 'Smart Card' status.

3.Click 'Add' or 'Modify' button to save the above User's QR code settings.

4.Click 'Show QR code.

5.You can then use the right-click to save the generated QR code as a JPEG file,and then transfer the JPEG to your mobile phone or print it out to access the device. After accessing the device via User's QR code, the device's LCD will display 'Please remove QR-Code' ,and then also capture User's picture.

Note:

1.Please keep at least 20 cm distance when accessing the device from mobile device's saved QR code.

2.As for the printed hardcopy of QR code ,please ensure that the QR code size is 3.5 CM * 3.5 CM .

Attachments:
ams_qr_code.jpg
qr_code_generate.jpg
qr_code_event_logs.jpg

Was this article helpful? yes / no

How to enable QR Code with two-factor authentication (Google Passcode)?

How to access the device using dual access method? e.g. SC/QR code + FACE or SC/QR code + FP or SC/QR code +PIN method.

What is the 2-digit Duress Code in terminal-setup and how to configure it?

What are the differences between ACTA-1K-P-SM and ACTA-1K-P-SMa model?

Can you explain about how to use the new Job code function to support the job costing dialogues ?

Article details

Article ID:	206
Category:	General
Views:	520
Rating (Votes):	(0)

« Go back